Customer case aboutconcrete granite performance

concrete granite performance

Performance of sustainable concrete containing

2016-4-15  As granite fines content increases up to 50%, the increase in compressive strength limits to 4% only as compared to the control mix (Divakar et al., 2012), whereas Elmoaty (2013) found that concrete compressive strength was improved at 5.0% granite dust as cement replacement. X-Ray Diffraction (XRD) and Scanning Electron Microscopy (SEM) analysis showed insignificant changes in

get price

Performance of self-compacting concrete comprising

2019-10-10  Ghannam et al. replaced granite powder waste with fine aggregate in NVC up to 20% by weight and observed elevated compressive and flexural strength of all granite modified concrete specimens compared to that of control specimen prepared without granite waste. In their study, they achieved optimum replacement level of granite powder waste at 10%, where both compressive and flexural strength values were highest among all concrete

get price

Performance of mortar and concrete incorporating

2018-4-30  Felix kala (2013) observed that using of granite powder waste as a partial substitution for sand in the presence of admixtures as a partial replacement of cement has beneficial effects of the mechanical properties of high performance concrete, the test results revealed that the superior performance of concrete has been achieved at 25% granite powder replacement.

get price

The influence of granite on the performance of

The influence of granite on the performance of autoclaved aerated concrete Citation for published version (APA): Straub, C., Segers, S., Florea, M. V. A., & Brouwers, H. J. H. (2017). The influence of granite on the performance of autoclaved aerated concrete. In V. Bílek, Z. Keršner, & H. Šimonová (Eds.), Non-Traditional Cement & Concrete VI, 19-22 June 2017, Brno, Czech Republic (pp. 288-295)

get price

Performance of ultra-high performance concrete

2019-7-20  Properties of ultra-high performance concrete (UHPC) which used ground granite powder (GGP) to replace cement by different ratios (from 0 to 25%) are experimentally investigated. The hydration products and pore structure on the micro scale, and the compressive and flexural strength as well as chloride permeability on the macro scale, were studied.

get price

Study on the effect of granite powder on concrete

2020-1-22  An experimental study on high-performance concrete made with granite powder as fine aggregate and partial replacement of cement with admixtures subjected to water curing was carried out. The percentage of granite powder added by weight was 0, 25, 50, 75 and 100% as a replacement of the sand used in concrete and cement was partially replaced with 7·5% silica fume, 10% fly ash, 10%

get price

Strength and Durability Properties of Granite Powder

2016-10-12  an experimental study on the high performance concrete made with granite powder as fine aggregate. The percentage of granite powder added by weight a range viz. 0, 25, 50, 75 and 100% as a replacement of sand used in concrete and cement was replaced with 7.5%Silica fume, 10% fly ash, 10% slag and 1% super plastiziser. The effects of curing

get price

[PDF] The influence of granite on the performance of

Autoclaved Aerated Concrete (AAC) has been well known in Central Europe for decades. In traditional cement and concrete research a huge increase of knowledge has improved the material behaviour and efficiency. The understanding of the mineral reactions and properties in AAC has also improved, but several relations are still unknown.

get price

Influence of granite fine powder on the performance

Meanwhile, the ranges of fluidity noted in all batches of CLWC are found to be 150-225 mm, 160-205 mm and 155-200 mm under the influence of using foam-binder ratio of 0.25, 0.5 and 0.1. As increasing foam –binder ratio from 0.25 to 0.1, a considerable reduction is observed in flow of CLWC.

get price

Experimental Study on Performance of M30 Grade

2018-12-31  The fine granite powder is observed to have silica content and can be used as fine aggregate. It is a well-established fact that the use of fly ash when partially replaced with cement enhances the strength and workability of concrete. Being silica-rich, granite powder can be used as replacement of fine aggregate in making sustainable concrete.

get price

Performance of sustainable concrete containing

Abstract Industrial by products such as granite cutting waste (GCW) are suspected to have a detrimental effect on environment. This paper emphasizes on a sustainable way of getting rid of GCW by using it as a partial replacement of natural fine aggregate (river sand) in conventional concrete. In this paper, strength and durability behaviour of concrete containing GCW is examined so as to

get price

Strength and Durability Properties of Granite Powder

2016-10-12  an experimental study on the high performance concrete made with granite powder as fine aggregate. The percentage of granite powder added by weight a range viz. 0, 25, 50, 75 and 100% as a replacement of sand used in concrete and cement was replaced with 7.5%Silica fume, 10% fly ash, 10% slag and 1% super plastiziser. The effects of curing

get price

Study on the effect of granite powder on concrete

2020-1-22  An experimental study on high-performance concrete made with granite powder as fine aggregate and partial replacement of cement with admixtures subjected to water curing was carried out. The percentage of granite powder added by weight was 0, 25, 50, 75 and 100% as a replacement of the sand used in concrete and cement was partially replaced

get price

The Research on the Effect of Granite Powder on

Within some dosage of granite powders, the compressive strength of the mixture is approximate to that of common concrete. When the 10% of cement was replaced by the granite powder, good impermeability performance exhibits, with the relative permeability coefficient 30% lower than that of common concrete.

get price

Performance of Self Compacting Concrete with

2020-3-27  Performance of Self Compacting Concrete with Replacement of Granite Powder as Fine Aggregate R. Elavarasan*¹, S. 5Aadhithya², K. Akila³, P. Amarthyasen4, M. Bhavadharani 1 Assistant professor, Dept. of Civil Engineering, Vivekanandha college of Technology for women, Tamilnadu, India

get price

Experimental Study on Performance of M30 Grade

2018-12-31  The fine granite powder is observed to have silica content and can be used as fine aggregate. It is a well-established fact that the use of fly ash when partially replaced with cement enhances the strength and workability of concrete. Being silica-rich, granite powder can be used as replacement of fine aggregate in making sustainable concrete.

get price

(PDF) MECHANICAL PROPERTIES OF HIGH

Thus granite aggregates performance concrete.3. The drying shrinkages of all the five concretes were very similar with a maximum value of 420 microstrain after 90 days. As regards shrinkage performance, these concretes are high performance.The present experimental programme indicates that the strength properties of the concrete could enhance

get price

MECHANICAL PROPERTIES OF HIGH PERFORMANCE

2011-9-13  Abstract This paper reports the results of an experimental study on the high performance concrete made with granite powder as fine aggregate. The percentage of granite powder added by weight a range viz. 0, 25, 50, 75 and 100% as a replacement of sand

get price

[PDF] Performance of Self Compacting Concrete with

Most of the works on Granite powder based Self Compacting Concrete (SCC) reveals that hardening is due to heat curing. Recent studies on the various properties of heat-cured have shown its suitability for applications such as precast concrete members. The heat curing process requires special arrangements, which is energy consuming and may not

get price

Influence of granite waste on mechanical and

2021-4-14  The performance evaluation of geopolymer concrete incorporated with granite waste was carried out through strength and durability studies such as dry density, compressive strength, ultrasonic pulse velocity, modulus of elasticity, water permeability,

get price

Performance of sustainable concrete containing

Abstract Industrial by products such as granite cutting waste (GCW) are suspected to have a detrimental effect on environment. This paper emphasizes on a sustainable way of getting rid of GCW by using it as a partial replacement of natural fine aggregate (river sand) in conventional concrete. In this paper, strength and durability behaviour of concrete containing GCW is examined so as to

get price

Performance of Self Compacting Concrete with

2020-3-27  Performance of Self Compacting Concrete with Replacement of Granite Powder as Fine Aggregate R. Elavarasan*¹, S. 5Aadhithya², K. Akila³, P. Amarthyasen4, M. Bhavadharani 1 Assistant professor, Dept. of Civil Engineering, Vivekanandha college of Technology for women, Tamilnadu, India

get price

(PDF) MECHANICAL PROPERTIES OF HIGH

Thus granite aggregates performance concrete.3. The drying shrinkages of all the five concretes were very similar with a maximum value of 420 microstrain after 90 days. As regards shrinkage performance, these concretes are high performance.The present experimental programme indicates that the strength properties of the concrete could enhance

get price

The Research on the Effect of Granite Powder on

Within some dosage of granite powders, the compressive strength of the mixture is approximate to that of common concrete. When the 10% of cement was replaced by the granite powder, good impermeability performance exhibits, with the relative permeability coefficient 30% lower than that of common concrete.

get price

Study on the effect of granite powder on concrete

2020-1-22  An experimental study on high-performance concrete made with granite powder as fine aggregate and partial replacement of cement with admixtures subjected to water curing was carried out. The percentage of granite powder added by weight was 0, 25, 50, 75 and 100% as a replacement of the sand used in concrete and cement was partially replaced

get price

MECHANICAL PROPERTIES OF HIGH PERFORMANCE

2011-9-13  Abstract This paper reports the results of an experimental study on the high performance concrete made with granite powder as fine aggregate. The percentage of granite powder added by weight a range viz. 0, 25, 50, 75 and 100% as a replacement of sand

get price

Experimental Study on Performance of M30 Grade

2018-12-31  The fine granite powder is observed to have silica content and can be used as fine aggregate. It is a well-established fact that the use of fly ash when partially replaced with cement enhances the strength and workability of concrete. Being silica-rich, granite powder can be used as replacement of fine aggregate in making sustainable concrete.

get price

[PDF] Performance of Self Compacting Concrete with

Most of the works on Granite powder based Self Compacting Concrete (SCC) reveals that hardening is due to heat curing. Recent studies on the various properties of heat-cured have shown its suitability for applications such as precast concrete members. The heat curing process requires special arrangements, which is energy consuming and may not

get price

Blue Tiburon High Performance Diamond Turbo Blades

This is for one super performance cut turbo blade. Excellent for cutting hard materials such as Quartzite and Quartz as well as Granite. We are excited to boast it is the b est quality turbo blade in USA. This blade is made in Korea excellent for cutting granite, engineered stone, concrete, brick 7/8 center hole with reducer spacer to make 5/8 arbor with four holes for flush mount adapter.

get price

Performance Evaluation of Stone Mastic Asphalt and

2014-9-7  Granite aggregates, 80/100 penetration grade bitumen, hydrated limestone powder, oil palm fiber, and recycled concrete aggregates (RCA) were obtained for use in this research. The crushed granite aggregates were provided from Kajang rock quarry (located near Kuala Lumpur, capital of

get price

Booking Online

#